Team Losi Racing 22 3.0 SPEC-Racer MM Race Kit: 1/10 2WD Buggy TLR03010

Brand: Team Losi Racing
Part Number: TLR03010
Sale: Was £319.99. Save £120.99
Availability:    No Stock
EAN: 605482173688
Save:   Add to wishlist
Free Delivery to most UK Mainland Destinations. See terms and conditions.
 Price Match: Request Now

Submit Price Match Request

Your Email:
Price Request: £
Weblink: *
*N.B. The weblink you supply should be of a valid matching UK product that is currently in stock on a UK retail website.
Our Price: £199.00

The award-winning 22 3.0 buggy has set the standard for peak performance in modified 2WD racing. The 22 3.0 SPEC-Racer kit does the exact same thing for the spec class. Every part has been examined and, where necessary, optimised to give you a spec racer that can dominate the competition, right out of the box.

Weighs in Under 1499 Grams
No expensive aftermarket parts are required to meet the minimum ROAR weight. Extra pockets milled into the chassis, along an assortment of lightweight parts, allow the 22™ 3.0 SPEC-Racer to be built using kit hardware and still weigh in under 1499 grams with all electronics installed. This gives racers the freedom to meet the ROAR minimum by using bigger, more powerful batteries or strategically adding ballast to maximize performance.

Lightweight Drivetrain
Major weight savings in the drivetrain let racers extract more effective torque and top speed from stock motors. The innovative ball differential, with its aluminium hub and composite outdrives, is 12.7g lighter than the stock diff. The TLR® Direct Drive System weighs 9.3g less than a slipper assembly, and the aluminium driveshafts with lightened axles are 7.8g lighter than the stock steel CVAs. It all adds up to 29.8 grams of weight saved in the drivetrain alone.

Ultra Lightweight Body
The included body has the same cab-forward lines as the original 22 3.0 body but is made of lighter 0.5mm polycarbonate. This gives the buggy all the aerodynamic benefits of the original while saving over 20 grams of weight and lowering roll centre at the same time.

Lightweight Motor Plate
A smaller motor plate designed specifically for the smaller spur gear sizes used in Spec-Class racing is included. It is CNC machined from 7075-T6 aluminium and paired with a polycarbonate gear cover to give racers the lightest and tidiest motor plate setup available.

Proven 22 3.0 Platform Features
The real genius in the 22 3.0 SPEC-Racer’s design is that team engineers were able to shave weight without sacrificing any of the most important features that make the standard 22 3.0 buggy such a dominating force in its class. These include the VLA front suspension geometry, revised motor location, transverse battery mounting, 2mm wider rear pivot, revised rear shock locations and more.


  • Type: 2WD Spec-Class Buggy
  • Completion Level: Kit
  • Scale: 1/10
  • Length: 382mm (15.0 in)
  • Width: 250mm (9.8 in)
  • Height: 148mm (5.8 in)
  • Weight: 1485g (52.4 oz) with electronics installed
  • Wheelbase: 280mm (11.0 in)
  • Chassis: 2.5mm Milled-Plate 7075-T6 Aluminium
  • Suspension: Lower A-Arm, Upper Adjustable Link
  • Shock Type: 12mm Big Bore, Oil Filled
  • Drivetrain: 2WD
  • Differential: Multi-Material Ball Differential
  • Wheel Type: 22 Dish
  • Wheel Diameter: 56mm (2.2 in)
  • Spur Gear: 69T
  • Gear Pitch: 48P
  • Internal Gear Ratio: 2.43:1
  • Body: 0.5mm Polycarbonate
  • Ball Bearings: Full Set, Rubber Sealed
  • Experience Level: Advanced
  • Is Assembly Required: Yes
  • Approx Assembly Time: 3-5 Hours



  • Based on the championship-winning 22 3.0 buggy
  • Track-ready weight of less than 1499 grams with full-size short, standard
  • Orion electronics and 2.2” tyres
  • Lightened 7075-T6 aluminium chassis
  • Ball diff with aluminium hubs and composite outdrives
  • Aluminium drive shafts with lightened axles
  • Lightweight motor plate with polycarbonate gear cover
  • 3-gear transmission for quicker acceleration
  • Ultra lightweight 0.5mm polycarbonate body
  • VLA front suspension geometry
  • Aluminium front axles
  • Gen II 12mm big-bore shocks
  • Transverse battery mounting option
  • Many popular option parts included as standard

Needed to Complete:

  • Motor and ESC
  • Tools
  • Pinion Gear
  • Steering Servo
  • Motor and ESC
  • Tools
  • Pinion Gear
  • Steering Servo
 Good Stock    £1.99
Manufacturer: Team Losi Racing
Part Number: TLR03010
Drive: 2WD
Surface Type: Off-Road
Assembly Type: Un-Assembled (Kit)
Scale: 1:10
Vehicle: Buggy
Skill Level: Skill Level 4   What's This?
Motor Type: No Motor Supplied