RPM Rear Bumper Mount for the Traxxas Slash, e-Rustler, e-Stampede and Bandit - Blue RPM80905

RPM Rear Bumper Mount for the Traxxas Slash, e-Rustler, e-Stampede and Bandit - Blue RPM80905
Brand: RPM
Part Number: RPM80905
RRP: £9.99. Save £0.50
Availability:    In Stock
EAN: 672415809051
Save:   Add to wishlist
Reviews: 3.5 Stars3.5 Stars3.5 Stars3.5 Stars3.5 Stars
Our Price: £9.49

After hearing numerous requests to look into the rear bumper mount on the Traxxas Slash, RPM found several issues that could use the their touch. Those same problems were encountered on e-Rustler, e-Stampede & Bandit vehicles using the stock wheelie bar mount. The problem – the stock mount uses only a single screw on the gear cover side to hold the mount in place. That causes a hinge effect under rear impacts causing the slotted area holding on to the rear skid plate to pop off after an impact, leaving the stock bumper/wheelie bar mount hanging under the chassis. The RPM solution… An all-new bumper mounting system that eliminates all of the problems encountered with the stock version.

The RPM rear bumper/wheelie bar mount has two mounting holes on the gear cover side and three on the motor side – that’s two additional mounting points to eliminate that annoying hinge effect mentioned above. The additional mounting screws help disperse impact energy into the transmission case over more surface area, reducing the possibility of damaging the case significantly! The new RPM mount design means no more slotted parts hanging below the rear skid plate – ever! Our mount tucks up quite nicely behind the skid plate for better rear end ground clearance.

The rear bumper/wheelie bar mount fits a wide range of vehicles too. It fits all versions of the Traxxas Slash, electric Stampede, electric Rustler and Bandit including VXL, XL-5 and legacy versions.

Each mount comes with all necessary hardware, complete instructions for ease of installation and an industry-leading warranty to back it all up!

3.5 Stars3.5 Stars3.5 Stars3.5 Stars3.5 Stars (2 Ratings)

These are very strong and usual rpm quality.After alot of bashing these do fail,and eventually the mounting screws will tear through the nylon after a big hit.If you bash hard it may be more viable to look at alternative such as T-Bone racing etc.

3 Stars3 Stars3 Stars3 Stars3 Stars  Posted on 7th Jul
Manufacturer: RPM
Part Number: RPM80905
Tune-Up Type: Chassis

Compatible With

24076-3R Traxxas Bandit VXL Brushless TSM iD RTR (Red)
24076-3BU Traxxas Bandit VXL Brushless TSM iD RTR (Blue)
24076-3S Traxxas Bandit VXL Brushless TSM iD RTR (Silver)
24076-3BK Traxxas Bandit VXL Brushless TSM iD RTR (Black)
24054-1BU Traxxas Bandit XL-5 iD RTR (Blue)
24054-1R Traxxas Bandit XL-5 iD RTR (Red)
24054-1CF Traxxas Bandit XL-5 iD RTR (Courtney Force)
24054-1BK Traxxas Bandit XL-5 iD RTR (Black)
24054-1S Traxxas Bandit XL-5 iD RTR (Silver)
37076-3-S Traxxas Rustler VXL TSM RTR (Silver)
37076-3-BK Traxxas Rustler VXL TSM RTR (Black)
37076-3-BU Traxxas Rustler VXL TSM RTR (Blue)
37076-3-R Traxxas Rustler VXL TSM RTR (Red)
37054-1BU Traxxas Rustler XL-5 iD RTR (Blue)
37054-1W Traxxas Rustler XL-5 iD RTR (White)
37054-1CF Traxxas Rustler XL-5 iD RTR (Courtney Force)
37054-1BK Traxxas Rustler XL-5 iD RTR (Black)
37054-1R Traxxas Rustler XL-5 iD RTR (Red)
37054-1PK Traxxas Rustler XL-5 iD RTR (Pink)
58034-1MAJ Traxxas Slash XL-5 iD RTR (Mark Jenkins)
58034-1AL Traxxas Slash XL-5 iD RTR (Arie Luyendyk JR. Edition)
58064-2W Traxxas Ford Raptor XL-5 TQi and OBA - White
58034-2MIJ Traxxas Slash 2wd XL-5 Audio RTR (Mike Jenkins)
58034-2W Traxxas Slash 2wd XL-5 Audio RTR (White Edition)
58034-1R Traxxas Slash XL-5 iD RTR (Red Edition)
58034-1CF Traxxas Slash XL-5 iD RTR (Courtney Force Edition)
58034-2MAJ Traxxas Slash 2wd XL-5 Audio RTR (Mark Jenkins)
58034-2BU Traxxas Slash 2wd XL-5 Audio RTR (Blue Edition)
58034-1O Traxxas Slash XL-5 iD RTR (Orange Edition)