High performance but low price, users can own this reliable race-ready ESC at an affordable cost.
Auto identification system can recognize sensored / sensorless brushless motors automatically. Excellent operating feelings and plentiful adjustment options, suitable for most kinds of competitions. 8 steps of timing adjustment greatly increase the output power of the motor, and unlock its maximum potential. Proportional brake with 4 steps of Maximum Brake Force adjustment, 8 steps of Drag Brake Force adjustment and 4 steps of Initial Brake Force adjustment. 9 steps of acceleration (punch) adjustment, from “soft” to“very aggressive” to fit for different kinds of cars, tires and tracks. Multiple protections like Low voltage cut-off protection, Over-heat protection, Throttle signal loss protection and Motor lock-up protection to extend the service life. One-button (the “SET” button on the ESC) to set the ESC, and easy to reset all parameters to the factory default settings. Compatible with the portable Digital LED Program Card, especially convenient for outdoor use.
Current - 60A, Burst: 380A
Input - 4-9 cells NiMH or 2-3S Lipo
BEC Output - 6V@2A (Linear Mode)
Resistance - 0.0008
Motor Supported - Sensored and Sensorless Brushless Motor
Cooling Fan - 6V (The cooling fan gets its power supply from the built-in BEC)
Weight - 59g (with wires, without cooling Fan)
Size - 33(L)X28(W)X31.5(H, with cooling fan)mm
Motor Limit - 4-6 cells NiMH/ 2S Lipo
8.5T(1/10 On-road), 13.5T(1/10 Off-road)
8-9 cells NiMH/ 3S Lipo
13.5T(1/10 On-road), 17.5T(1/10 Off-road)
Car Applicable - 1/10 & 1/12 On-road / Off-road /
F1 / Drift car race Street race for fun /
Club racing / Daily practice /
STOCK race with 0 timing / Drift car race
Manufacturer | Hobbywing |
---|---|
Part Number | HW30105060003 |
EAN | 5051294085483 |
ESC Mode | Forward/Reverse |
Battery Compatibility | LiPo/NiMh |
ESC Type | For Brushless Motors |
Max Nimh Volt Rating | 10.8v / 9 cell |
Power Rating | Upto 60 Amps |
Motor Compatibility Type | Sensored |
Max Lipo Volt Rating | 11.1v / 3s |
Easy to use and set up, great value for money
by guestVery happy with this esc, very easy to install and runs very smoothly, love the fact you can programme fully without having to buy programme card, and little extras like heat shrink and tape Inc for the install.
by ter brake_33354Ooohhh - nice!! Fitted this snugly in the XV-01. So snug, it doesn't need the double sided tape.... It does fit with the fan on top. I removed the small lids on the XV-01 cover and fitted a nylon stocking on the large cover to prevent debris to hit the fan. Wires needed to be soldered with extensions to reach the motor. The programming seems a bit of a challenge with counting flashes and beeps. So far I'm driving on factory settings, it's great fun!
by vector9Great little esc,s bought a few of these great value, even stud up to buggy racing.
Choose additional options for this product below.
Please provide the details below so we can review and offer a price match where possible.
Your email:
Price request:
Weblink: *
* The weblink you supply should be of a valid matching UK product that is currently in stock on a UK retail website.