Absima Mamba 7 Brushless Rock Racer RTR - Green

That was the first comment when we took the prototype out for its first test drive. Size aside, this vehicle offers so much that we dont even know where to start. The name MAMBA resulted from our first experiences, because the driving behavior could be described as biting. However, the built-in electronics and the remote control offer enough possibilities to adapt the vehicle to the respective driving skills of the pilot despite all its power.
 
The maximum speed is in your own hands!
 
On one hand, you can throttle the vehicle down to a humane maximum speed using a rotary knob on the remote control. On the other hand, a beginner mode is available, which can also be set via the remote control and reduces the maximum power to 50%. The operation is basically also possible with 2x 2S LiPos. However, if you want to get the full performance of +/- 100 km/h, you should tend to very powerful 2x 3S LiPo batteries with a high C-rate (60C +) and good internal resistance. For further fine tuning, a separately available programming box is available.

Highlights:

• ​4282 size Brushless Motor with 2000KV
• Aluminum Middle Differential Case
• Hardened steel drive components
• 4mm One-Piece Aluminum Chassis Plate

Biteful design!      

• A multi-piece very detailed body available in neon-green or neon-orange
• LED front headlights, taillights and light bar on the roof
• Fully detailed interior with 2 figures, dashboard and control panel
• Roll cage, driver safety nets
• Multi-terrain wheels with beadlock-look and closed hubcaps     
• Full size spare wheel
• Optional mountable wheelie bar 

Chassis and Drive Units:

• One-Piece 4mm aluminum chassis - anodized and with ABSIMA engraving 
• Tower-to-Tower Aluminum braces for maximum durability
• Center differential with sturdy aluminum housing 
• Metal differential outdrives 
• 5mm Steel drive shafts and CVD shafts at the front
• 6mm CNC Aluminum shock towers
• Adjustable aluminum oil-filled shock absorbers 
• Aluminum wheel hubs and steering arms
• Aluminum steering brace
• Aluminum wishbone bracket front and rear
• Aluminum motor mount and center differential mount
• Wishbones made of glass fiber reinforced material 
• 5mm Threaded rods front and rear 
• Completely ball bearing mounted drive train 
• Extra-rugged front bumper and spare wheel holder 
• Stabilizer set front and rear    

Electronic components:
The ABSIMA CR4S 4-channel remote control including R4WP-Micro receiver has a foam rubber steering wheel and a beginner mode which reduces the engine power to 50%. In addition, you have 2 more channels available to control, for example, the separately available mechanical handbrake.
 
Fast and precise 25kg steering servo with metal gear.
 
Big car, big motor! A 4282 brushless motor with 2000KV provide plenty of propulsion. This monster with 42mm diameter and 82mm length is cooled by two 30mm high-speed fans.         
 
The ESC with its 150A continuous current also has a fan which ensures a perfect operating temperature. The electronics are powered by either two 2S batteries or two 3S batteries with XT90 high current connectors which fit perfectly into the two battery compartments in the rear of the vehicle. Due to the well thought-out distribution of all components, an optimal weight distribution is guaranteed. 

Full Features:

• Scale: 1/7
• Drivetrain: 4WD
• Length: 680mm
• Width: 380mm
• Height: 230mm
• Weight: 5,8kg (without batteries)    
• Ground Clearance: 55mm
• Wheelbase: 419mm
• Track front/rear: 330mm/320mm     
• Chassis: One-Piece 4mm Aluminum Chassis Plate    
• Suspension: Independent    
• Shock Absober (front): 110mm, oil-filled    
• Shock Absorber (rear): 130mm, oil-filled  
• Wheels: 165x63mm, All-Terrain
• Rims: ø90mm; Beadlock-look    
• Ball Bearing: Complete ball bearing drive train    
• Motor Type: Brushless, Sensorless
• Motor Power: 2000KV
• Motor Size: 4282 (ø42mm x Length 82mm)    
• Motor Cooling: 2* High-Speed Fans mounted on a Aluminum Heatsink    
• Pinion: 13T, Modul 1.0
• Spur Gear: 50T
• Final Drive Ratio: 15.1
• Electronic Speed Controller: 150A ESC with XT90 Plugs and Cooling Fan    
• Load: 150A Continuous / 720A Peak
• BEC: 6.1V or 7.4V / 3A (Switch Mode)
• ESC programmable: YES (with optional program box)    
• Drive System: 5mm CVD Shafts (front) and 5mm Metal Cardan Shafts         
• Battery Compartments: 4,9 x 15,5 cm
• Operation with: 2* 2S/7.4V LiPo Batteries or 2* 3S/11.1V LiPoBatteries    
• High Speed: +/-100 km/h (with 2x 3S LiPo batteries)    
• Radio: „CR4S 4-Channel 2.4GHz  
• Steering Servo: 25kg, Metal Gear

Includes:

• 1/7 Rock Racer MAMBA 7 6S RTR - GREEN VERSION
• 4-CH Radio CR4S including R4WP-Micro Receiver
• 17mm Aluminum Wheel Wrench
• Various spare parts (Velcro, beadlock screws...) 
• Manuals for Car and Radio (DE/ENG/FR)

Requires:

• LiPo Batteries x2 7.4v or x1 11.1v LiPos with XT-90 Connectors
• Suitable LiPo Balance Charger
• LiPo Charge Bag (recommended)
• x4 AA Batteries for Transmitter