Experience the full force of 60km/h speed as soon as you open the box!
Serious offshore racer features auto-recovery from capsize function
Hit maximum speed of approximately 60km/h with 14.8V 4-cell Li-Po battery (sold separately).The high-performance EP Jet Stream 888VE Readyset features incremental changes and includes Kyosho’s highest specification transmitter, receiver and rudder servo combination. In the event of capsize; weight balance is changed by water entering the ballast room to right the hull to its normal posture and automatically drain out allowing the boat to continue running. This unsinkable design removes the risk and worry of losing your boat if it flips over.
The high-precision CNC aluminum intake rudder with bracket and the high-durability metal adjustable flaps with excellent wave resistance are retained while the R/C system is upgraded to the KS4031-06W waterproof servo that removes any concerns from flooding and delivers superior response with the Syncro KT-231P transmitter with 130m range for wider control and reliability. The high torque outrunner type brushless motor combines with the waterproof ORION 80A ESC to provide a racing boat experience like no other.
- Pre-colored FRP factory assembled hull reaches speeds of 60km/h.
- Newly designed high-power 80A Team Orion water-cooled ESC features cell auto-detect.
- Pre-installed brushless outrunner water-cooled motor generates excellent torque characteristics.
- Unsinkable self-righting structure.
- Flip-up rudder design prevents damage if boat contacts an obstacle.
- Equipped with combination turn fin and trim tab with adjustable angle.
- Features stopper to prevent loss of shaft.
- Includes drip proof rubber boots, aluminum servo mount, carbon nylon 3-blade propeller.
- Pre-colored fully assembled hull
- Syncro KT-200 transmitter
- Water-cooled brushless motor
- Water-cooled 80A ESC
- Wire joint drive unit
- Duralumin water intake rudder unit
- Boat stand
- Spare propeller
- Pre-installed 2.4GHz Synchro KT-231P R/C system
Required for Operation
- 3-4 cell 11.1V-14.8V-3,600-4,000mAh Li-Po battery (Deans Connector specification/compatible size: L138xW42xH33)
- Charger for Li-Po battery
- Batteries for transmitter
- Length 900mm
- Width 187mm
- Height 140mm
- Weight 1,780g (approx. installed 14.8V-1400mAh)
- Motor Brushless outruuner water-cooled Aqua Speed Pro BLS3744
- Battery 3-4 cell 11.1V-14.8V-3,600-4,000mAh Li-Po (Super Plug specification, sold separately)
- Screw Carbon-reinforced nylon D40 x P1.4 (3-blade)
- Amp Team Orion water-cooled 80A waterproof ESC
- Servo KS-4031-06W
|Battery Connector Type:
Skill Level 4