The newly developed MM2 motor mount enables the combination of the 94mm wheelbase and the
mid-ship motor position at the same time. The heavy motor is positioned in front of the rear axle,
which greatly contributes to the centralized mass compared with the existing RM motor mount.
Also, a friction plate shock absorber unit is integrated in the MM2 motor mount for pitch and roll
Furthermore, the MM2 motor mount features a 3-position ride height adjuster, which allows you to
raise or lower the rear axle by 1mm steps. Combined with the slightly tamed but still powerful
5600KV blue can Eco brushless motor, this chassis goes best with Japanese street cars such as
Nissan GT-R, Toyota 86, and Subaru BRZ.
The chassis comes equipped with an MHS/ASF compatible Rx ESC unit, ball bearings, gold
plated battery terminals and a ball diff as standard. With the MHS mode enabled (requires Syncro
EX-6), the PRO MM2 chassis responds to your fingertip control four times as fast as the ASF
If you don’t have an EX-6 transmitter now, no worries, the PRO chassis can also be controlled by
the ASF system transmitter such as KT-18 and EX-5UR although the response speed is the same
as the standard ASF mode.
◆ Ball bearings equipped on all axles.
◆ Gold plated battery terminals enable efficient current flow.
◆ Powerful 130-class compatible size sensor-less brushless motor with double ball bearings.
◆ Adjustable power characteristics via the ICS expansion port.
◆ Power indicator feature. Good for equal condition races.
◆ Ball differential unit equipped as standard
◆ Optional gyro can be mounted on the top of the upper cover for easier access.
◆ New MM2 motor mount with 3-position rear ride height adjustment function.
◆ Integrated friction plate shock absorber.
NOTE: The MM2 motor mount is not compatible with brushed motors.
Chassis set contents
*Almost-factory-assembled MR-03N-MM2 chassis equipped with brushless Rx-ESC unit *tread
width conversion parts to the narrow configuration *Pinion Gears (6T, 7T, 8T, 9T) *Rear shock stay
for wheelbase conversion *Front suspension adjustment spacers *Pinion gear removal tool
Required for operation
MHS or ASF compatible radio such as Syncro EX-6, Perfex KT-18 and Perfex EX-5UR (You need
MHS compatible radio for optimum performance) *4 x AAA batteries (high-grade NiMH batteries
preferred for optimum performance) for chassis and batteries for the transmitter *Mini-Z Auto
Scale Collection (Body shell, wheels and tires)
Scale : 1/27.6
Length : 120-128mm
Width : 65-76mm
Height : 37.5mm
Chassis Type : MM2
Wheelbase : 94.0mm(L) – 102.0mm(3L)
Tread (F/R): 56.5-63.0mm
Weight : 135g
Motor : 130 class 5600KV brushless motor
Gear Ratio : 7.3, 6.3, 5.5, 4.9:1
Tire Diameter (F) : sold separately
Tire Diameter (R) : sold separately
Transmitter (EX-6/KT-18/EX-5UR) sold separately
Run Time : approx. 50 minutes