HPI Plazmapro 7.4v 4000mah 95c Lipo Shorty 29.6wh 110600

HPI Plazmapro 7.4v 4000mah 95c Lipo Shorty 29.6wh 110600
Brand: HPI
Part Number: 110600
RRP: £39.99. Save £4.00
Availability:    On Order with Supplier Email Me  
EAN: 4944258025728
Save:   Add to wishlist

Request Stock Notification

Your Email:
Our Price: £35.99

Important Product Safety Information   

WARNING:
Lithium batteries can be dangerous if not handled correctly.
These safety points are to be used as a general guide.
Please refere to the specific user instruction and warnings supplied with your Lithium battery before use.
 

ONLY use a charger designed for lithium batteries.
ALWAYS use a safe sack, charging pouch or fireproof container to place your batteries in whilst charging.
ALWAYS use the balance lead connection when charging.
NEVER use a NiMh or NiCad charger.
NEVER charge the batteries unattended.
NEVER leave the battery connected when not in use.

General Guidelines and Warnings:

  • Use specific Lithium Polymer/Li-ion charger only. Do not use a NiMH or NiCd charger. Failure to do so may a cause fire.
  • Never charge batteries unattended. When charging LiPo/Li-ion batteries you should always remain in constant observation to monitor the charging process and react to potential problems that may occur.
  • Some LiPo/Li-ion chargers on the market may have technical deficiencies that may cause it to charge the LiPo/Li-ion batteries incorrectly or at an improper rate. It is your responsibility solely to assure the charger you purchased works properly. Always monitor charging process to assure batteries are being charged properly. Failure to do so may result in fire.
  • If at any time you witness a battery starting to balloon, swell up, smoke or get hot, discontinue charging process immediately, disconnect the battery and observe it in a safe place for approximately 15 minutes. This may cause the battery to leak, and the reaction with air may cause the chemicals to ignite, resulting in fire.
  • Since delayed chemical reaction can occur, it is best to observe the battery as a safety precaution. Observation should occur in a safe area outside of any building or vehicle and away from any combustible material.
  • Wire lead shorts can cause fire! If you accidentally short the wires, the battery must be placed in a safe area for observation for approximately 15 minutes. Additionally, if a short occurs and contact is made with metal (such as rings on your hand), severe injuries may occur due to the conductibility of electric current.
  • A battery can still ignite even after 10 minutes.
  • In the event of damage due to bad shipment or other reason, you must remove battery for observation and place in a safe open area away from any combustible material for approximately 15 minutes.
  • If for any reason you need to cut the terminal wires, it will be necessary to cut each wire separately, ensuring the wires to not touch each other or a short may occur, potentially causing a fire.
  • To solder a connector: Remove insulating tape of Red wire and solder to positive terminal of a connector, then remove insulating tape of Black wire and solder to the negative terminal of connector. Be careful not to short the wire lead. If you accidentally cause the battery to short, place it in a safe open space and observe the battery for approximately 15 minutes. A battery may swell or even possibly catch fire after a short time.
  • Never store or charge battery pack inside your car in extreme temperatures, since extreme temperature could ignite fire.

Popular Options

#O-FS-LCB02
 Good Stock    £6.49

The HPI PlazmaPro competition range features high-end packs designed purely for use on the race track! This 'shorty' LiPo pack fits the latest EFRA/ROAR size specifications for use in buggies and on-road racing cars. The 95C power rating will give you plenty of acceleration while the 4000mAh rating will allow you to fully utilise the power of the pack throughout a 5-minute race. This pack uses 4mm female plugs for easy fitment in all cars and a universal balancing plug for simple maintenance.

Voltage: 7.4V
Capacity: 4000mAh
Current Rating: 95C for extreme high-power applications
Case Type: 'Shorty' LiPo case, sealed plastic
Dimensions: Each pack is 95 x 46.8 x 24.8mm
Weight: 208g
Plug: 4mm plugs for easy wire configurations

Touring car racers should check out our #110601 PlazmaPro pack, a full-size pack with loads of juice for all serious racers!
 

Manufacturer: HPI
Part Number: 110600
Battery Connector Type: 4mm Gold Tubes
Voltage: 7.4v/ 2s
Battery Configuration: Shorty
Battery Capacity: 4000mAh
Battery Type: LiPo
Battery Application: Power Packs
'C' Rating: 95C