E-Flite 1300mAh 4S 14.8V 35C LiPo Battery EFLRB13004S35

E-Flite 1300mAh 4S 14.8V 35C LiPo Battery EFLRB13004S35
Brand: E-Flite
Part Number: EFLRB13004S35
RRP: £29.99. Save £1.50
Availability:    Supplier Stock
EAN: 605482617373
Save:   Add to wishlist
Our Price: £28.49

Important Product Safety Information   

WARNING:
Lithium batteries can be dangerous if not handled correctly.
These safety points are to be used as a general guide.
Please refere to the specific user instruction and warnings supplied with your Lithium battery before use.
 

ONLY use a charger designed for lithium batteries.
ALWAYS use a safe sack, charging pouch or fireproof container to place your batteries in whilst charging.
ALWAYS use the balance lead connection when charging.
NEVER use a NiMh or NiCad charger.
NEVER charge the batteries unattended.
NEVER leave the battery connected when not in use.

General Guidelines and Warnings:

  • Use specific Lithium Polymer/Li-ion charger only. Do not use a NiMH or NiCd charger. Failure to do so may a cause fire.
  • Never charge batteries unattended. When charging LiPo/Li-ion batteries you should always remain in constant observation to monitor the charging process and react to potential problems that may occur.
  • Some LiPo/Li-ion chargers on the market may have technical deficiencies that may cause it to charge the LiPo/Li-ion batteries incorrectly or at an improper rate. It is your responsibility solely to assure the charger you purchased works properly. Always monitor charging process to assure batteries are being charged properly. Failure to do so may result in fire.
  • If at any time you witness a battery starting to balloon, swell up, smoke or get hot, discontinue charging process immediately, disconnect the battery and observe it in a safe place for approximately 15 minutes. This may cause the battery to leak, and the reaction with air may cause the chemicals to ignite, resulting in fire.
  • Since delayed chemical reaction can occur, it is best to observe the battery as a safety precaution. Observation should occur in a safe area outside of any building or vehicle and away from any combustible material.
  • Wire lead shorts can cause fire! If you accidentally short the wires, the battery must be placed in a safe area for observation for approximately 15 minutes. Additionally, if a short occurs and contact is made with metal (such as rings on your hand), severe injuries may occur due to the conductibility of electric current.
  • A battery can still ignite even after 10 minutes.
  • In the event of damage due to bad shipment or other reason, you must remove battery for observation and place in a safe open area away from any combustible material for approximately 15 minutes.
  • If for any reason you need to cut the terminal wires, it will be necessary to cut each wire separately, ensuring the wires to not touch each other or a short may occur, potentially causing a fire.
  • To solder a connector: Remove insulating tape of Red wire and solder to positive terminal of a connector, then remove insulating tape of Black wire and solder to the negative terminal of connector. Be careful not to short the wire lead. If you accidentally cause the battery to short, place it in a safe open space and observe the battery for approximately 15 minutes. A battery may swell or even possibly catch fire after a short time.
  • Never store or charge battery pack inside your car in extreme temperatures, since extreme temperature could ignite fire.

Key Features

  • Powerful 35C continuous discharge rating
  • Available in four capacities; 850, 1000, 1300 and 1800mAh
  • Race-ready 4-cell configuration
  • Heavy-duty lead wire with durable silicone insulation
  • Lightweight for optimum flight performance
  • Flexible silicone insulated balance wires
  • Compact construction with ultra-short leads
  • No soldering required
  • Assembled with EC3™ main and JST balance plugs
  • The ideal battery choice for the Blade® Vortex 250 Pro FPV quad-racer

Overview

Key Features Powerful 35C continuous discharge rating Available in four capacities; 850, 1000, 1300 and 1800mAh Race-ready 4-cell configuration Heavy-duty lead wire with durable silicone insulation Lightweight for optimum flight performance Flexible silicone insulated balance wires Compact construction with ultra-short leads No soldering required Assembled with EC3™ main and JST balance plugs The ideal battery choice for the Blade® Vortex 250 Pro FPV quad-racer Overview

 

The E-flite® brand is proud to introduce a new series of 4S Li-Po battery packs specifically built for the FPV Racer. Thrust™ Series FPV Racing batteries are ideal for the racing platforms from 150- to 285-size such as the Blade Vortex 250 Pro that demands the power 4S, 14.8V Li-Po packs can provide.

Compact E-flite® Thrust Series lithium polymer batteries are rated at 35C to offer an excellent power-punch without a major weight penalty. Four capacity sizes are available from 850mAh to 1800mAh with the 1000mAh and 1300mAh packs rounding out the middle of the range. These batteries come with the popular EC3™ connector with silicone insulated wire for a level of durability that can be appreciated at all performance levels. The output and balance leads are short to make installation on FPV racers as sleek as possible. Like the popular line of E-flite High-Power Li-Po batteries, its JST-XH balance connector is compatible with a wide range of popular chargers such as those from Orion® and Dynamite®. A 3C charge rating means that these batteries can be fast charged safely. If you're looking for a compact 4S Li-Po pack to suit your electric powered aircraft, choose an E-flite Thrust Series battery and go for it!

 

 

Product Specifications

 

Type: Li-Po (Lithium Polymer)
Capacity: 1300mAh
Voltage: 14.8V (3.7V per cell)
Connector Type: EC3
Wire Gauge: 12AWG
Number of Cells: 4
Weight: 5.47 oz (155 g)
Configuration: 4S1P
Length: 2.75 in (70mm)
Width: 1.26 in (32mm)
Height: 1.48 in (37.5mm)
Application: FPV Racing Quadcopter
Maximum Continuous Discharge : 35C
Maximum Continuous Current : 45.5A
Charge Protection Circuitry: No
Manufacturer: E-Flite
Part Number: EFLRB13004S35
Battery Capacity: 1300mAh
Voltage: 14.8v/ 4s
Battery Type: LiPo
Battery Application: Flight
'C' Rating: 35C

Compatible With

BLH9250EU Blade Vortex Pro: BNF