Lithium batteries can be dangerous if not handled correctly.
These safety points are to be used as a general guide.
Please refere to the specific user instruction and warnings supplied with your Lithium battery before use.
ONLY use a charger designed for lithium batteries. ALWAYS use a safe sack, charging pouch or fireproof container to place your batteries in whilst charging. ALWAYS use the balance lead connection when charging. NEVER use a NiMh or NiCad charger. NEVER charge the batteries unattended. NEVER leave the battery connected when not in use.
General Guidelines and Warnings:
Use specific Lithium Polymer/Li-ion charger only. Do not use a NiMH or NiCd charger. Failure to do so may a cause fire.
Never charge batteries unattended. When charging LiPo/Li-ion batteries you should always remain in constant observation to monitor the charging process and react to potential problems that may occur.
Some LiPo/Li-ion chargers on the market may have technical deficiencies that may cause it to charge the LiPo/Li-ion batteries incorrectly or at an improper rate. It is your responsibility solely to assure the charger you purchased works properly. Always monitor charging process to assure batteries are being charged properly. Failure to do so may result in fire.
If at any time you witness a battery starting to balloon, swell up, smoke or get hot, discontinue charging process immediately, disconnect the battery and observe it in a safe place for approximately 15 minutes. This may cause the battery to leak, and the reaction with air may cause the chemicals to ignite, resulting in fire.
Since delayed chemical reaction can occur, it is best to observe the battery as a safety precaution. Observation should occur in a safe area outside of any building or vehicle and away from any combustible material.
Wire lead shorts can cause fire! If you accidentally short the wires, the battery must be placed in a safe area for observation for approximately 15 minutes. Additionally, if a short occurs and contact is made with metal (such as rings on your hand), severe injuries may occur due to the conductibility of electric current.
A battery can still ignite even after 10 minutes.
In the event of damage due to bad shipment or other reason, you must remove battery for observation and place in a safe open area away from any combustible material for approximately 15 minutes.
If for any reason you need to cut the terminal wires, it will be necessary to cut each wire separately, ensuring the wires to not touch each other or a short may occur, potentially causing a fire.
To solder a connector: Remove insulating tape of Red wire and solder to positive terminal of a connector, then remove insulating tape of Black wire and solder to the negative terminal of connector. Be careful not to short the wire lead. If you accidentally cause the battery to short, place it in a safe open space and observe the battery for approximately 15 minutes. A battery may swell or even possibly catch fire after a short time.
Never store or charge battery pack inside your car in extreme temperatures, since extreme temperature could ignite fire.
The new generation DJI Intelligent Flight Battery is a 4480mAh, 15.2V LiPo4s battery that is specifically designed for the Phantom 3 series, enabling optimal performance. Supporting up to 23 minutes of flight time, the battery also has built-in sensors and bright LEDs that let you know the status and remaining power of your battery in real time.
High capacity for up to 23 minutes of flight time
Four LEDS display both the status and the remaining power of the battery
Integrated power management and balanced charging capability
Smart charge/discharge functionality helps protect your battery
Easy slot-in design for fast charging and installation/removal
Updated specifically for the Phantom 3 Professional and Phantom 3 Advanced
Charging the Battery
Batteries must be charged using a DJI approved adapter. DJI takes no responsibility if the battery is charged using a non-DJI charger. Never leave the battery unattended during charging. Do not charge the battery near flammable materials or on flammable surfaces such as carpet or wood.
Do not charge battery immediately after flight, because the battery temperature may be too high. Do not charge the battery until it cools down to near room temperature. The battery cannot be charged outside of the temperature range of 0°-40°.
Charge and discharge the battery completely once every 20 charge/discharge cycles. Discharge the battery until there is less than 8% power or until it can no longer be turned on, then recharge it to the maximum capacity. This power cycling procedure will optimize the battery life.
Dispose of the battery into specific recycling boxes only after a complete discharge. Do not place the battery into regular rubbish bins. Strictly follow your local disposal and recycling regulations of batteries.
If the power on/off button of the Intelligent Flight Battery is disabled and the battery cannot be fully discharged, please contact a professional battery disposal/recycling agent for further assistance.
Battery Type: LiPo 4S
This Intelligent Flight Battery is compatible with Phantom 3 Advanced, Phantom 3 Professional, Phantom 3 Standard and Phantom 3 4K.
Battery Connector Type:
DJI-PHT3A1 DJI Phantom 3 Advanced RTF Quadcopter Drone
No longer available
DJI-PHT3S DJI Phantom 3 Standard RTF Quadcopter Drone
No longer available
DJI-PHT34K DJI Phantom 3 4K RTF Quadcopter Drone
No longer available