The all-new MT4 G3 is ready to convince your neighbours that the brushless power rules!
Powered by the high torque 2000Kv brushless motor and twin battery packs, the MT4 G3 can pull wheelies, back flips and get air off the jump easily!
The differentials of the MT4 G3 are equipped with steel spiral bevel gears to help it handle the brutal torque of the 2000Kv motor. The MT4 G3s 3mm rigid aluminum chassis and brace are securely mounted and the brace cover features vents to keep the batteries and electronics cool. The MT4 G3 features full CVD drive shafts and high quality bearings to deliver maximum efficiency to survive from the outrageous torque and abused operation. In addition to this, the ACE RC cougar 2.4GHz radio system is also included right in the box to give you the most long-range, convenient and reliable radio control.
- Fully assembled and Ready-To-Run
- Pre-Printed Hi-Flow Dynamic Body
- Cougar 2.4GHz Transmitter and micro receiver
- 8kg/cm Metal Gear Steering Servo
- ACE RC 1:8 150Amp Blushless ESC 2-6 Cell
- High torque Ripper 2000Kv brushless motor
- High Current Super Deans Plugs Included
- Heavy Duty Steel Diff Ring/ Pinion
- Rear, Center and Front Fluid Filled Differentials
- CNC Machined Aluminum Motor Mount
- CNC Machined Steel Pinion Gear
- Equipped Front/Rear/Center CVD Drive Shafts
- Adjustable Steel Turnbuckles
- Compact Molded Chassis Brace And Cover
- Center Drive Shaft Guard For Cable Protection
- Anodized Aluminum Oil-Filled Shocks
- 17mm Aluminum Wheel Hubs
- Compatible with most ST-1 series parts
The new MT4 G3 is offered in a completely ready to go form. All components are pre-assembled, all you have to do is to add your battery packs of choice for the club’s smack down. The MT4 comes equipped with an ACE RC BLC-150C race spec ESC and super torque 2000KV motor combo, front, rear and center CVD universals, all fluid filled differentials, 17mm wheel hubs to mach up its powerful output.
The front and rear transmission of MT4 is the same as the nitro ST-1, which comes equipped with a hardened steel differential rings that makes stripping a gear a barely mission impossible. All the diffs contain a full set of steel diff gears and diff fluid inside in combination with full set of bearings throughout the drive train to ensure the most smooth power transmission.
The front and rear suspension uses the same race proven composite nylon suspension arms as the nitro ST-1. The shock bodies are made of anodized aluminum with quick adjustment clips for ease of changes. The shock towers are made from 4mm thick aluminum plate with multiple shock mounting positions and the whole chassis is strongly stiffened with a compact molded chassis brace and cover. You can also fine tune for the optimal camber and toe setting with adjustable turnbuckles and suspension blocks for your demanding cornering and overall handling.
The power system is equipped with a powerful 150A ESC and a 2000KV super brushless motor that will give MT4 G3 super fast speed and huge torque. But the most important thing is that the ACE RC brushless power system enables you a longer play time due to less friction in the brushless motor comparing to other RTRs. Other multiple protection features, like low voltage cut-off protection, over-heat protection, throttle signal loss protection, motor blocked protection and splash/dust proof cover are just making the ESC bullet-proof.
- Wheelbase(mm / in.) 360mm
- Weight(g/ lbs.) 4180g
- Length(mm / in.) 532mm
- Width(mm / in.) 434mm
- Height(mm / in.) 240mm
- Motor IBL40/20 2000Kv brushless motor
Requirements: 2, 7.4V (2S) LiPo batteries OR 1, 11.1V (3S) LiPo battery OR 1, 14.8V (4S) LiPo battery with Deans style connectors.