RPM Rear Prop Guards for Dromida Vista/ Ominus - Black RPM72102

RPM Rear Prop Guards for Dromida Vista/ Ominus - Black RPM72102
Brand: RPM
Part Number: RPM72102
RRP: £7.49. Save £0.37
Availability:    No Stock
EAN: 672415721025
Save:   Add to wishlist
Our Price: £7.12

The Dromida Vista and Ominus quadracopters are fantastic performers straight out of the box. But if you’re a beginner, they need some protection – either for the motor and propellers or for everything you’re likely to hit! RPM Prop Guards add the protection you’ll need. Our Prop Guards are super lightweight and install in a matter of minutes.

Each Prop Guard is molded in our trademark blend of engineering grade nylons for unmatched strength and durability. While we made our Prop Guards extremely tough, we also made them very light to minimize the effects of added weight on the airframe, weighing in at less than 5 grams per guard!

RPM Prop Guards for the Dromida Vista & Ominus are sold in pairs (one front set and one rear set will be needed for one Vista / Ominus airframe) and are molded in either dyeable white or black. Instructions for dyeing RPM parts can be found here.

RPM Prop Guards will pay for themselves the first time you have one of those “oops” moments! Don’t let a mistake ruin your day of fun. Bolt a set of RPM Prop Guards on and let your confidence soar!

Tech Notes: Sold in pairs. One set of front and one set of rear Prop Guards are required for one Vista / Ominus. All four Prop Guards (2 – front & 2 – rear) must be installed at the same time. Failure to install Prop Guards in all four corners may cause adverse flying characteristics. RPM Prop Guards are designed as “bumpers” to help deflect light to medium impacts. They are not designed to save the Vista / Ominus from full speed or gravity fed crashes. A 0.05″ (or 1.25mm) hex key wrench is required (not included) for installation.