The digiSOUND5cbb is an RC car sound module, it is the worlds first 100% waterproof, plug n play sound module designed to take the hassle out of giving your model a realistic sound! The sound module requires NO programming or set up, it comes with a realistic sound pre-installed leaving just the installation to complete before you can get under way! The unit comes complete with built in amplifier, wiring loom and even a 50.0mm diameter waterproof speaker!
You simply install the unit in your model and go! There is no complicated PC interface to deal with or complicated set up, you REALLY do just have to plug it in and go!!! Add this to the legendary Mtroniks waterproof construction and you really don't need to look any further!
This version of the digiSOUND comes with a pre installed V12 race engine sound, the high pitch engine sound of a high revving circuit race car can give a very realistic effect to any RC model car!! Perfect for any RC model car.
Click below for a sample of the V8 straight cut engine sound sound. NOTE: This recording was created using the standard speaker that comes included with the sound module, the quality of the sound you hear will depend very strongly on the speakers on your computer and may not give an accurate representation of the high quality sound you get from the digiSOUND system. This is just to give an idea of the sound you can expect.
Notes on speaker performance.
The 50.0mm speaker included with your module is waterproof so it is safe to use outside, you should always install your speaker into a suitable enclosure (your lexan bodyshell) to ensure the best power handling, frequency and bass response.
Product Type: Sound System
Model Type: Model Car
Operating Voltage: Maximum 12.0 Volts
Battery Type: NiCAD/NiMH/Lead Acid/LiPo
Lipo safe: Yes
Digital sound: 16-Bit
Engine sound: V12 Circuit
Speakers included: 1
Speaker size: 50.0mm diameter
Speaker Impedance: 4 to 8 ohms
Motor Type: Brushed/Brushless
Wiring loom included: Yes
Power Output: 4W
Dimensions: L40,0mm x W35.0mm x H15.0mm