HPI Plazmapro 7.4v 5600mah 95c Lipo Batterypack 40.7wh 106400

HPI Plazmapro 7.4v 5600mah 95c Lipo Batterypack 40.7wh 106400
Brand: HPI
Part Number: 106400
RRP: £54.99. Save £5.50
Availability:    On Order with Supplier Email Me  
EAN: 4944258011837
Save:   Add to wishlist

Request Stock Notification

Your Email:
Our Price: £49.49

Important Product Safety Information   

Lithium batteries can be dangerous if not handled correctly.
These safety points are to be used as a general guide.
Please refere to the specific user instruction and warnings supplied with your Lithium battery before use.

ONLY use a charger designed for lithium batteries.
ALWAYS use a safe sack, charging pouch or fireproof container to place your batteries in whilst charging.
ALWAYS use the balance lead connection when charging.
NEVER use a NiMh or NiCad charger.
NEVER charge the batteries unattended.
NEVER leave the battery connected when not in use.

General Guidelines and Warnings:

  • Use specific Lithium Polymer/Li-ion charger only. Do not use a NiMH or NiCd charger. Failure to do so may a cause fire.
  • Never charge batteries unattended. When charging LiPo/Li-ion batteries you should always remain in constant observation to monitor the charging process and react to potential problems that may occur.
  • Some LiPo/Li-ion chargers on the market may have technical deficiencies that may cause it to charge the LiPo/Li-ion batteries incorrectly or at an improper rate. It is your responsibility solely to assure the charger you purchased works properly. Always monitor charging process to assure batteries are being charged properly. Failure to do so may result in fire.
  • If at any time you witness a battery starting to balloon, swell up, smoke or get hot, discontinue charging process immediately, disconnect the battery and observe it in a safe place for approximately 15 minutes. This may cause the battery to leak, and the reaction with air may cause the chemicals to ignite, resulting in fire.
  • Since delayed chemical reaction can occur, it is best to observe the battery as a safety precaution. Observation should occur in a safe area outside of any building or vehicle and away from any combustible material.
  • Wire lead shorts can cause fire! If you accidentally short the wires, the battery must be placed in a safe area for observation for approximately 15 minutes. Additionally, if a short occurs and contact is made with metal (such as rings on your hand), severe injuries may occur due to the conductibility of electric current.
  • A battery can still ignite even after 10 minutes.
  • In the event of damage due to bad shipment or other reason, you must remove battery for observation and place in a safe open area away from any combustible material for approximately 15 minutes.
  • If for any reason you need to cut the terminal wires, it will be necessary to cut each wire separately, ensuring the wires to not touch each other or a short may occur, potentially causing a fire.
  • To solder a connector: Remove insulating tape of Red wire and solder to positive terminal of a connector, then remove insulating tape of Black wire and solder to the negative terminal of connector. Be careful not to short the wire lead. If you accidentally cause the battery to short, place it in a safe open space and observe the battery for approximately 15 minutes. A battery may swell or even possibly catch fire after a short time.
  • Never store or charge battery pack inside your car in extreme temperatures, since extreme temperature could ignite fire.

The HPI Plazma range of battery packs is growing, with several new options available for hobbyists and racers!

Our PlazmaPro competition range features two high-end packs designed purely for use on the race track! This pack fits within all accepted maximum pack sizes for saddle pack batteries, allowing it to fit in any competition touring car, buggy and other types of racing car. The 95C power rating will give you plenty of acceleration while the 5900mAh rating will allow you to fully utilise the power of the pack throughout a 5-minute race. It also features a real Dean's connector and a universal balancing plug for simple maintenance.

Voltage: 7.4V
Capacity: 5600mAh
Current Rating: 95C
Case Type: Saddle Pack LiPo case, sealed plastic
Dimensions: Each pack is 67 x 45 x 24mm
Plug: Deans Ultra Plug for extreme high-power applications

The Plazma battery range now features a wide range of fantastic products, including 2 new Ni-MH battery options, including a 7-cell battery for extra power. We've also got 4 new LiPo hardcase battery packs, including 2 custom-fit for the Savage Flux monster truck, and a massive 4S pack that is ideal for vehicles that use 2 battery packs, such as the Trophy, Vorza and more!

Racers have something to look forward to as well, with the addition of the brand new PlazmaPro 95C competition line of batteries! We have a normal size rectangular case 95C battery as well as a saddle pack style battery for use in kits that require the use of saddle packs.

New Plazma Nickel-Cadmium Options
#106388 - PLAZMA 7.2V 4700mAh Ni-MH Battery Pack
#106390 - PLAZMA 8.4V 3300mAh Ni-MH Battery Pack - 7 cells for more punch!

Expanded Plazma LiPo Range
#106397 - PLAZMA 7.4V 8000mAh 35C LiPo Battery Pack - Custom fit for Savage Flux!
#106401 - PLAZMA 11.1V 3200mAh 95C LiPo Battery Pack - Massive power!
#107222 - PLAZMA 11.1V 5600mAh 50C LiPo Battery Pack - Custom fit for Savage Flux!
#107225 - PLAZMA 14.8V 5100mAh 40C LiPo Battery Pack - Perfect for dual-battery kits like the Trophy, Vorza and more!

Brand New PlazmaPro Competition Line!
#106399 - PLAZMAPRO 7.4V 6500mAh 95C LiPo Battery Pack - Normal style
#106400 - PLAZMAPRO 7.4V 5600mAh 95C LiPo Battery Pack - Saddle pack style